PE Services can provide efficient and comprehensive feed systems within Dairy Parlours. From the provision of a meal bin / feed silo, the flexi-auger system and the feed dispensers. Systems can be designed and installed for all sizes of parlours. Our reliable service and competitive prices ensure that our customers are always satisfied.


PE Services offer  galvanized steel storage bulk feed tanks available in a variety of specifications featuring:

  • Steep 30° roof slopes for fast moisture run off.

  • Hoppers available in 45, 60, and 67° slopes for effectively handling a variety of feeds & grains.

  • Specially engineered bracing for maximum support.

  • Exclusive, patented Auto-Lok ground controlled lid openers.

  • Drip Lipdiverts water away from the hopper and lower boot area.

  • Hopper Valve allows easy grain sampling.

  • E-Z Kleenout panel allows for convenient and thorough ground level inspection and cleaning.


PE Services offer your choice of a 30 degree or 40 degree bin roof to adapt to any application. Roof panels are precision manufactured Reinforcing Ribsusing die-form tooling to provide consistent quality. Both 30 degree and 40 degree roofs feature reinforcing ribs at each roof seam for added strength and rigidity.


PE Services offers you a variety of bin sizes to fit your specific needs Bin size

4 tonne, 5.5 tonne, 6.5 tonne, 8 tonne

10 tonne, 12 tonne, 16.5 tonne, 19.5 tonne

Strength & Durability – High tensile steel walls, galvanised coating, with unique high strength leg support system. Featuring Patented ‘Auto-Lok’ ground control access system for opening, closing and latching the fill cap safely and easily from the ground.


Nothing beats PE Services’s Flex-Flo™ feed delivery system in flexibility and adaptability. Using PVC tubing as the carrier of feed not only provides flexibility in facility design, but reduces dust, provides protection against insect and rodent contamination, and reduces stressful operation noise.


PE Services offers several unloader systems including single, twin, tandem and twin tandem models. The Flex-Flo auger can be direct or belt driven by a 1/3 to 1 – 1/2 horsepower, totally enclosed fan cooled motor at a standard 358 RPM (other speeds are available for special applications). A wide selection of accessory equipment is also available including extension hoppers to adjust auger lengths, time clocks, automatic shut-off switches, intermediate drop kits, and y-drops.


Both tubing and augers are available in four sizes and five models with capacities ranging from 15 lbs. to 220 lbs./minute (6.8 kg to 99.8 kg/min.). Whether it’s ground feed, crumble feed, mash, high moisture corn, shelled corn or pellets, PE Services has the equipment to handle it.

For corn with up to 27% moisture and other hard to flow material, PE Services also offers a Flex-Flo™ High Roughage system which incorporates a special combination of a 3″ (75 mm) auger in a 3 – 1/2″ (90 mm) tube to reduce plugging.


The Flex-Flo™ auger is driven by a 1/3 to 1-1/2 horsepower, totally enclosed, fan cooled motor at a standard 358 RPM (other speeds are available for special applications).

Whether direct or belt driven, the drive system includes an easily accessible maintenance port a safety back-up switch which automatically stops and restarts the motor if for any reason feed backs up in the line (a readily visible warning light comes on to notify you that this is occurring) … and an automatic thermal shut-off switch which allows you to restart the system when the motor has cooled off.) All electrical connections are made in a plastic, water resistant control box.


For moving feed up in the air and around corners, Flex-Flo™ tubing is available in specially formed elbows with increased wall thickness on the inside of the elbow for strength and wear resistance.


PE Services’s augers are coiled in-house from high tensile steel. The steel wire we use is flattened prior to hardening, providing for a more consistent, higher quality product.


PE Services’s polyvinyl chloride (PVC) tubing is mixed and formed in our own facility to exacting standards under strict quality control. Blending our own PVC allows us to formulate the optimum compound for UV stabilization, strength, and wear resistance.