Search

Dry Feeding

PE Services supply Pig Dry Feeding Systems, customised to the individual farmers' needs. Our partners Skiold provide future proof systems which have been proven to produce excellent results. Skiold's Transpork system is made of very strong construction and has nearly twice the capacity of any other pig dry feeding system. The drive units can be wall or floor fitted. PE Services also supply the Skiold MiniPork system which has a capacity of 850kg/hr. A feature of this system is the self-emptying cabinets which minimise feed remnants. 

PE Services supply the most advanced dispenser, Skiold Smartfeeder, where a mix of meal pellets and wet corn can be used. This system can be installed in old buildings and a lift floor can be used. The sow is feeding depending on her need and appetite. It is a single- or double-dry feeding distribution system. Skiold volume dispensers can be used with the Transport System. 

Skiold's Phase Feeding allows for up to five different mixtures to be dispensed through the one pipeline by means of a computer-controlled system. The farmer also has the option of MultiPhase feeding which can control up to 2,000 feed valves and 10 mixing units on load cells. The transport MultiPhase system can handle 50 components in 40 silos. 

There are specific dosing methods for sows before farrowing and after farrowing. The two options are Ad libitum or automatic adjustment depending of the animal. The health benefits for the sow are that her natural feeding capacity is respected. It optimises the sow’s reproductive performance. 

The water distribution management helps optimise milk production. There is no daily adjustment of the dispensers, which limits mistakes as human intervention is limited. 

Any feeding adjustment is dependent on the feed curves. Waste in the troughs is minimised. The information is real time and available on your electronic device.

TRANSPORK

SKIOLD TransPork has an unmatched capacity of up to twice that of other dry feeding systems due to its very strong construction. TransPork® dry feeding system can be installed with SKIOLD volume dispensers or used as a filling system for Maximat® feeding automats.

The drive unit can be installed on the floor or mounted on a wall. The drive unit is equipped with an integrated console, which prevents cable breakage in case of overloading by foreign bodies.

The TransPork® corners are cast of hardwearing plastic and can be positioned horizontally, vertically or with inclination. Each heavy-duty inner wheel is fitted with dustproof ball bearings. Further protection against damp and feed penetration is provided by the two outer casing parts, which are bolted together with stainless bolts to ensure a dustproof seal.

The SKIOLD TransPork hopper is simple in design with a stainless cabinet for outdoor as well as indoor mounting. The hopper can be placed free-standing on the floor or suspended under a silo. The inlet is adapted for standard hoppers but is also available with special connections.

MINIPORK

SKIOLD MiniPork drive unit is a small solid drive unit with a capacity of up to 850 kg/h. It is a compact 0.75 kW system with self-emptying cabinets to minimize feed remnants.

SKIOLD MiniPork has a unique design and can be installed on the floor or mounted on a wall or ceiling. The equal placement of inlet and outlet of the SKIOLD MiniPork enables a horizontal installation of the feed pipe. The pulling of the drive unit is reversible and simplifies the installation.

The drive unit is equipped with an integrated console, which prevents cable breakage in case of overloading by foreign bodies. Furthermore, the drive unit is equipped with a switch, which automatically stops the system if the cable gets too loose. An outside indicator shows when the cable needs tightening and when a cable shortening is necessary.

MULTIPHASE CONTROLS

With SKIOLD Transpork Multiphase Feeding, which is a simple and accurate computer-controlled feeding system, it is possible to control up to 2000 feed values and 10 mixing units on load cells. The equipment can control the mill mix system including an intelligent recipe lever for the SKIOLD disc mill. The transport multiphase feeding system can handle up to 50 feed components in 40 silos.

It is possible to feed your animals restrictively or ad libitum and efficiency reports of the consumption of feed is available on either pen- or section level. Depending on the weight of the pig, each pen is allocated exactly the blend, which is the most optimal at the given time.

Skiold Multiphase feeding system can be operated from a PC with a multinational user menu and it is possible to get efficiency reports on either pen or section level. It is possible to connect a mini dosing unit adding i.e. vitamin on valve level. It is connectable to PDA (handheld terminal) with possibility to integrate with Agrosoft management program.


FEEDING CONTROLS

PE Services has several different solutions for optimal control of your dry feeding. MultiPork can be connected to an inductive sensor for extra safety when using the motorized hopper. MultiPork is able to control systems with automatic feed release functions. It also comes with a built-in fully automatic “Flow Time Control” being very suitable for systems with dispensers or alternative systems where the feeding requirements have only small deviations in the feed consumption from time to time.

Through the completion detector, the system will learn the required feed quantity, and disconnect the motorized hopper in time to avoid filling of the feed circuit before the next feeding. This reduces load and wear to the system, and an extra completion detector can be saved.

The control panels for TransPork® consist of 3 basic units, which can be combined and extended with a series of modules – a flexible program of control units to be tailored individually and thus meet the demands from each farmer. All 3 controls have an alarm for motor overload protection and wrong cable tension with the emphasis on simple and user-friendly front panel. TransPork 0 M is a simple panel to control all sorts of ad-lib systems as well as dispenser systems with a manual release. Combining this panel with a motorized hopper, it can almost empty the feed circuit by means of a double-sensor-system (two completion detectors) and thus avoid starting up the system with full contents of feed.


 

 
 
 
 
web design by dmac media